Select Page

Photovoltaic Componenets

Photovoltaic Componenets

Features

The Acti9 C60H-DC is a miniature circuit breaker that offers direct current circuit protection. It protects circuits against short-circuit currents and overload currents.

  • Compliant with IEC60947 -2
  • Available in 1P or 2P
  • C tripping curve
  • Up to 500V DC.

The Acti9 C60PV-DC is a miniature circuit breaker that is designed for photovoltaic (PV) installations. It protects the cables between each string of a photovoltaic module against short-circuit currents and overload currents.

  • Compliant with IEC/EN 60947-2
  • Available in 2P
  • B or C tripping curves
  • Up to 800V DC
  • Pre-wired
  • Non-polarized: wires can be inverted without risk
  • Locakable for improved operational safety
  • Delivered with three interpole barriers, for improved isolation between connectors.

Benefits

Acti9 C60H-DC:

  • Enhanced operational safety thanks to green strip toggle indicator which increases safety of downstream current flow when breaker is in open position
  • Improved service life thanks to fast closing of breaker, independent of operator
  • Short-circuit current limitation thanks to fast opening of contacts, to reduce risk of damage to circuit loads.

Acti9 C60PV-DC:

  • Enhanced operational safety thanks to green strip toggle indicator which increases safety of downstream current flow when breaker is in open position
  • Improved service life thanks to fast closing of breaker, independent of operator
  • Short-circuit current limitation thanks to fast opening of contacts, to reduce risk of damage to circuit loads
  • Easier installation as wires can be inverted without risk (non-polarized).

Applications

 Acti9 C60H-DC:
Direct current circuits such as industrial control, automation, transportation and renewable energy.

Acti9 C60PV-DC:
Designed for direct current photovoltaic installations.

Type 1 Surge Protectors


Type 1 surge protectors are designed to be installed where a direct lightning strike risk is high, especially when the building is equipped
with external lightning protection system (LPS or lightning rod). In this situation, EN 61643-11 and IEC 61643-11 standards require the Class I test to be applied to surge protectors : this test is characterized by the injection of 10/350 µs impulse current in order to simulate the direct lightning strike consequence. Therefore these Type 1 surge protectors must be especially powerful to conduct this high energy impulse
current.

Type 2 Surge Protectors


Type 2 surge protectors are designed to be installed at the entrance of the installation, in the main switchboard, or close to sensitive terminals, on installations without LPS (lightning rods). These protectors are tested following the Class II test from IEC61643-11 or EN61643-11 standards and based on 8/20 µs impulse current injection.

PV PHOTOVOLTAICS / DC LOAD BREAK SWITCHES 16-32A

  • Up to 32 A 1200 V DC, DC21B, refer to detailed product specifications
  • Compact size DC load break switch (PV)
  • 1, 2, 3 and 4 pole versions
  • Compatible with K/PV 2P and K/PV 4P front plates,  LK10 handle and L=100/200/300 AD11 shafts
  • Wide operating temperature range
  • Padlockable LK10
  • LK10 with door interlock with defeat mechanism
  • Pollution degree 3, Icw = 0,8 kA (1s), Icm = 1,128 kA

PV PHOTOVOLTAICS / DC LOAD BREAK SWITCHES 400A

  • 400 A @ 1500 VDC-21B
  • Four poles in series
  • Made of 100% recyclable materials
  • Reliable switch for demanding industrial applications
  • Available with direct handle (SV 800 KIT) or separate handle (LKX 150 or LKX 150 Y/R) and shaft (LVK)
  • Auxiliary contacts available (1. V160KU or 2. V160KU), up to 8 NC + 8 NO
  • Terminal covers and phase barriers (VS800) available

PVA/PVM PHOTOVOLTAICS / DC ENCLOSED SWITCHES

  • Up to 32 A 1200 V DC, DC21B, and 32 A 1000 V DC, DC-PV2, refer to detailed product specifications
  • Available in Poly carbonate and Aluminium enclosures
  • IP 66; IP 66NW outdoor use
  • Enclosure types U2 (PVM) and A2 (PVA)
  • Self-extinguishing material
  • Wide operating temperature range
  • Pad lockable
  • Door interlock with defeat mechanism
  • Excellent insulating properties
  • Good UV resistance
  • Good resistance against many chemicals

Solar
Powered by Hensel (ENYSUN)

The photovoltaic market is going to grow significantly in coming years as more and more investors and home owners are betting on solar power’s high margin electricity. With our ENYSUN distribution board systems for photovoltaic plants conforming to standards, we support you in accessing this market. ENYSUN is a high value, modular system, which generates additional sales potential for you on the growing photovoltaic market.

Profit from a system which offers you clear competitive advantages on the market and which you can always rely on.

Standard Requirements
for the Installation of Photovoltaic Plants
* All ENYSUN distribution system products fulfill the IEC 60 364-7-712 standard.
 * Our ENYSUN product solutions provide a number of advantages when selecting and installing photovoltaic systems.