DIN Rail Power Supplies : CP10.241-S1

DIN rail power supplies for 1-phase system
24V, 10A
spring clamp terminals


DC output 24 – 28Vdc
10 – 8.6A
Input AC 100 – 240V (-15%/+10%)
DC 110V – 150V (± 20%)
Dimensions (WxHxD) 39 x 124 x 117mm
Weight 600g
Category: Tags: , ,

Technical data

Input data

AC Input voltage AC 100 - 240V (-15%/+10%)
DC Input voltage DC 110V - 150V (± 20%)
Harmonic correction active
Power factor 0.97
Input inrush current limitation active
Input inrush current 6A / 9A
External input fuse recommendation B-6A / C-6A

Output data

Nominal voltage 24Vdc
Adjustment range 24 - 28V
Output current range 10 - 8.6A
Output current 8.6A at 28V
10A at 24V
Output power 240W
Power reserves 20% Power Boost
Derating 6W/°C for >+60°C
Ripple and noise voltage max. 50mVpp


Dimensions (WxHxD) 39mm x 124mm x 117mm
Weight per unit (excl. packaging) 600g
Mounting method DIN rail
Operating temp. range -25°C to 70°C
Connection method Spring clamps
Efficiency, typ. 95.2%
Power losses, typ. 12.1W
MTBF SN 29500 @ 40°C (h) 667000h
DC-OK signal yes
  • AC 100-240V Wide-range input
  • Width only 39mm
  • Efficiency up to 95.2%
  • Excellent partial load efficiency
  • 20% Output power reserves
  • Safe Hiccup PLUS overload mode
  • Easy fuse breaking due to high overload peak current
  • Active power factor correction (PFC)
  • Minimal inrush current surge
  • Full power between -25°C and +60°C
  • DC-OK relay contact



There are no reviews yet.

Be the first to review “DIN Rail Power Supplies : CP10.241-S1”

Your email address will not be published. Required fields are marked *