Select Page

RTD &Thermocouples

Temperature Sensors

SITRANS TS-Temperature Sensors are the perfect basis for precise and safe temperature measurement. The RTDs and Thermocouples support a broad range of application through the process industries.

  • SITRANS TS100: with direct connected cable
  • SITRANS TS200: with direct mount connectors (M12, Lemo, …)
  • SITRANS TS300: for food, pharmaceuticals and biotechnology modular design
  • SITRANS TS500: The industry-grade temperature sensor supports a wide range of measuring go from basic applications to solutions in harsh environment.
  • SITRANS TS Inserts: spare part for the SITRANS TS500 or as component to build up complete temperature assemblies
  • SITRANS TSthermowell: a comprehensive portfolio of thermowells
  • The thermocouples are available in versions up to 1250 °C and and are suitable for the mounting of SITRANS TH320, SITRANS TH420, SITRANS TH400
  • The thermoresistors are available for flue gas and for damp rooms (mounting possible for SITRANS TH100, SITRANS TH320, SITRANS TH420, SITRANS TH400)
SITRANS TS100
The construction of the SITRANS TS100 temperature sensor line is based on mineral insulated cable (MIC) and supports a wide range of applications. Due to compression fittings or soldering nipples the installation is simple and flexible and is possible up to Zone 0 without the need of an additional thermowell.
Benifits

  • Simple mounting – Compression fittings or soldering nipples enable a fast commissioning

  • Universal – Sensor line is designed to serve a wide range of applications  

  • Customizable – SITRANS TS100 is based on a modular platform offering variety

  • Safe solution – Explosion protection by intrinsically safety Ex i (IS) even in Zone 0
  • Certificates for major markets
Detail

Output

 Sensor signal

Max. operation temperature
– measuring point

– cable end

 Pt 100 Basic: -50 .. .+400 °C (-58 … +752 °F)
Pt 100 Extended: -196 … +600 °C (-320.8 … +1112 °F)
Thermo couple -40 … +1250 °C (-40 … 2282 °F) Depending on type
-40° … +80 °C (-40 … +176 °F)

Ingress protection

 IP66 (between sensor and cable)

Approvals

 ATEX, IECEx, cCSAus, EAC, NEPSI
SITRANS TS200
The construction of the SITRANS TS200 temperature sensor line is based on mineral insulated cable (MIC) and supports a wide range of applications. Due to compression fittings or soldering nipples the installation is simple and flexible and is possible up to Zone 0 without the need of an additional thermowell.
Benifits
  • Simple mounting – Compression fittings or soldering nipples enable a fast commissioning
  • Universal – Sensor line is designed to serve a wide range of applications
  • Customizable – SITRANS TS200 is based on a modular platform offering variety
  • Safe solution – Explosion protection by intrinsically safety Ex i (IS) even in Zone 0
  • Certificates for major markets
Detail

Output

 direct sensor signal

Max. operaton temperature

– measuring point

– cable end

 

Pt 100 Basic: – 50 … +400 °C (-58 … +752 °F)
Pt 100 Extended: -196 … +600 °C (-320.8 … +1 112 °F)
Thermo couple -40 … +1250°C  (-40 … +2 282 °F) (depending on type)

-40 … +80 °C (-40 … +176 °F)

Ingress protection

IP54 (depending on connector type)

Approvals

 ATEX, IECEx, CSA, cCSAus, NEPSI, EAC, EACEx

 

Sitrans 410 Digital Temperature by Siemens
SITRANS TS300
SITRANS TS300 was designed for use in hygienic applications. The advantages of the clamp-on technology come into play particularly with small pipe diameters: no welding and welding validation, no disruption to the process, piggability maintained, easy disassembly for recalibration and all this with a measurement accuracy that is comparable to that of the built-in sensors.
Benifits
  • Hygienic – Sensor design according to EHEDG recommendations
  • Available – Inserts exchangeable
  • Low costs, many advantages – Low cost of ownership for installation, validation and recalibration; no process disturbance
Detail

Output

direct sensor signal 
4…20 mA (TH100/TH200) 
HART (TH300) 

PA (TH400) 
FF (TH400)

Max. operation temperature  
– In the pipe:
– Clamp-on:

 

–30…+300 °C
–20…+160 °C

Ingress Protection

 IP65 (IP54 for some type of connection heads)

 

SITRANS TS500
SITRANS TS500 are temperature sensors for a wide range of measurement applications – from simple to complex, e.g. for harsh environments. The modular design of the system with a protective tube made of tubular or solid material, an extension, a connection head, an optional transmitter or a display enables the use of standard components. Intrinsically safe or flameproof designs are also available.
Benifits

  • Exchangeable during operation  

  • Wide application range due to modular design  

  • Explosion protection by the ignition protection types, intrinsically safe Ex i (IS), increased safety Ex e (NI) or flameproof enclosure Ex d (XP) resp dust protection by means of enclosure Ex t (DIP)
  • Certificates for major markets

  • With optional local indicator and operation

Detail

Output

 direct sensor signal 
4…20 mA (TH100/TH320)
HART (TH320)
PA (TH420) 
FF (TH420)

Max. operation temperature

– measuring point:

 

– connection head:

 

Pt 100 Basic: –50 … +400 °C (-58 … +752 °F)
Pt 100 Extended: –196 … +600 °C (-321 … +1 112 °F)
Thermocouple: -40 .. .+1250 °C (-40 … +2282 °F) (Depending on type of TC and thermowell)

-40 … +100 °C (+85 °C with transmitter)

Ingress protection

 IP54-68, depending on the type of connection head and cable gland

Approvals

 General Purpose (FM, CSA)
for use in hazardous locations ATEX, IECEx, cCSAus, NEPSI, EAC, KOSHA
for use in marine applications  DNV

Ready to Grow?

Get a Free Consultation